Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hysys dynamics assistant does not recognize pipe diameter

Status
Not open for further replies.
chemebabak

chemebabak

Chemical
Joined
Feb 8, 2011
Messages
100
Location
US
I am running Hysys 7.3 The dynamics assistant indicates that there is not error with simulation, however when I run it, I get an error "Unknown Pipe Diameter". I have specified the pipe diameter in a spreadsheet and I have tried to specify directly in the pipe object viewer. Where should I look to fix this error?
 
Status
Not open for further replies.

Similar threads

AlejandraGuillen
  • Locked
  • Question Question
Simulación de equipos reales en Aspen Hysys
Replies
0
Views
947
AlejandraGuillen
AlejandraGuillen
Jack Nicholson
  • Locked
  • Question Question
Entering ppm concentration in ASPEN HYSYS
Replies
0
Views
1K
Jack Nicholson
Jack Nicholson
chemiee
  • Locked
  • Question Question
Aspen Hysys - How to create an equilibrium curve ?
Replies
0
Views
4K
chemiee
chemiee
Riko_93
  • Locked
  • Question Question
Aspen Hysys V9- Latent heat calculation
Replies
0
Views
823
Riko_93
Riko_93
Said92441322
  • Locked
  • Question Question
Peng Robinson BIPs Estimation Method In Hysys
Replies
0
Views
782
Said92441322
Said92441322

Part and Inventory Search

Sponsor

Back
Top