Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Entering ppm concentration in ASPEN HYSYS

Status
Not open for further replies.
Jack Nicholson

Jack Nicholson

Chemical
Joined
Oct 20, 2016
Messages
119
Location
IR
Dear all, Hi!. I have a question.
How can I enter ppm level of concentration, when Aspen HYSYS just use 0.0001 of accuracy.
Thanks in advance.
 
Status
Not open for further replies.

Similar threads

AlejandraGuillen
  • Locked
  • Question Question
Simulación de equipos reales en Aspen Hysys
Replies
0
Views
947
AlejandraGuillen
AlejandraGuillen
chemiee
  • Locked
  • Question Question
Aspen Hysys - How to create an equilibrium curve ?
Replies
0
Views
4K
chemiee
chemiee
pepsferr
  • Locked
  • Question Question
Aspen Custom Modeler, Aspen Reaction toolkit
Replies
0
Views
1K
pepsferr
pepsferr
Sirius P.Eng.
  • Locked
  • Question Question
Aspen Flare System Analyzer - Force Specified Rated Capacity to Flow From a Relief Valve
Replies
0
Views
737
Sirius P.Eng.
Sirius P.Eng.
Riko_93
  • Locked
  • Question Question
Aspen Hysys V9- Latent heat calculation
Replies
0
Views
823
Riko_93
Riko_93

Part and Inventory Search

Sponsor

Back
Top