mechanicalmark
Mechanical
Does Anyone know of a company in the Delaware Valley (or North Eastern USA) that has a hydrotest machine that can handle a 24" Nominal size, 150# (check) valve with butt weld ends that is approximately 54" long?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hydrotes Service Needed
- Thread starter mechanicalmark
- Start date
- Status
Contact one of these companies and see if the have someone with their equipments in your area.
If you have some flanges you could rent a portable tester that would easily test the valve.
If you have some flanges you could rent a portable tester that would easily test the valve.
- Status
Similar threads
