Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hydrogen Bakeout Determination

Status
Not open for further replies.

NickelMet

Materials
Aug 19, 2002
181
US
Does anyone know of an existing reference that would help one determine whether or not a piping system (within a petroleum refinery) would need a hydrogen bakeout?

Lengthy references are okay, but I've been asked to develop a SHORT and SUCCINT methodology to help our planners.

Thanks!

 
Replies continue below

Recommended for you

Hi,
accordance with each standard that use for each work and each service (sour or materials that you use other) you must doing hydrogen backout or test methodes for determine sensivity to hydrogen accordance NACE.
Best regards,
S.M,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top