Hydraulic valve standards 1

[cjlrb]

The project I am on has taken me into hydraulics and I am needing to find out were I can get a hold of the specs for the valve standards that are refered to as D03, D05 etc.

 

[maytag]

Try the Eaton/Vickers, Parker or Bosch Rexroth catalogs.
Maytag

 

[hydtools]

It may be a Sauer Danfoss valve:

http://www.sauer-danfoss.com/Produc...lves/D03D05DirectionalControlValves/index.htm

Ted

 

[cjlrb]

Thanks for the replies. I choose to check the Parker catalog. Page 18 on the link I am posting below is where they begin to list the hole patterns and dims.

http://www.parker.com/literature/Hy...Catalogs/Cat HY14-2502_4-06/HY14-2502c001.pdf

 

[cjlrb]

The link posted by Ted also has some of the templates listed.

 

[hydtools]

Here is the NFPA standard for purchase:

http://www.nfpa.com/Standards/Standards_Details.asp?sid=NFPA/T3.5.1

R2-2002

Ted