Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hydraulic fluid 1

Status
Not open for further replies.

moodyelgamal

Electrical
Joined
Apr 15, 2006
Messages
4
Location
EG
can i use diesel fuel as a hydraulic fluid for pressure
3bar
low pressure cylinders
 
Although diesel shouldn't detonate at 43.5 psi, I would caution against using it as a working fluid. You'll have storage, disposal, material compatibility and safety considerations to deal with that you wouldn't normally with another hydraulic. Also, diesel is stinky, and it's almost impossible to keep it from pervading the air around your appartus unless it's is well ventilated.
 
You're asking for headaches. Why not go with a very light turbine oil instead. I concur with eltron on the smell of diesel oil.
 

For vehicles, 10w-40 is used about as much as hydrualic fluid these days.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top