Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hydraulic Danger
- Thread starter 123Dog
- Start date
Normal factors for safety for a hydraulic conductor operating above 2500psi is 4. Burst pressure of the conductor should be 40,000 psi.
The environment around the conductor is controlled by the end user. If there are dangers present which can damage the conductor then naturally the lines should be protected.
The environment around the conductor is controlled by the end user. If there are dangers present which can damage the conductor then naturally the lines should be protected.
- Status
Similar threads
- Locked
- Question
- Locked
- Question