Hydraulic Counterbalance Valve Circuit

[Caveland]

Hi! I have involved in a hydraulic system design which used for winch pull.

Specification as below:

1. Hydraulic Cylinder: Bore: 320mm x Rod: 200mm x Stroke: 1600mm @ 2 unit

2. Counterbalance Valve.

The hydraulic cylinder mounted horizontally.

Please advice my design.

Thank you.

 

[Jboggs]

What is your question?
If you want someone to review your design and give you advice you need to take it to a senior engineer who understands the application.

 

[Jboggs]

Maybe this text will help:

http://hydraulicspneumatics.com/other-technologies/book-2-chapter-5-counterbalance-valve-circuits

 

[MintJulep]

Impossible to tell because your schematic representation of the "counterbalance valve" doesn't seem to follow any drawing standard.

 

[kiwitom235]

First of all your question should be in fluid power section. Yes, you should use a counterbalance valve with a hydraulic cylinder, but I am not sure what your questions is?