May 26, 2009 #1 NightME Mechanical Joined Jan 13, 2009 Messages 70 Location US Does anyone know of a good hydraulic calculation software that is stand alone and does not require a CAD program to use (ie HydroCAD, etc)?
Does anyone know of a good hydraulic calculation software that is stand alone and does not require a CAD program to use (ie HydroCAD, etc)?
May 26, 2009 #2 SprinklerDesigner2 Mechanical Joined Nov 30, 2006 Messages 1,281 Location US I've used HASS since the mid 1980's. http://www.hrssystems.com/ Upvote 0 Downvote
May 27, 2009 1 #3 TravisMack Mechanical Joined Sep 15, 2003 Messages 1,777 Location US HASS & HydraCAD are probably the best. You may still be able to get Elite and I believe it is quite a bit cheaper than the others. Howver, I would go with HASS or HydraCAD. Travis Mack MFP Design, LLC Upvote 0 Downvote
HASS & HydraCAD are probably the best. You may still be able to get Elite and I believe it is quite a bit cheaper than the others. Howver, I would go with HASS or HydraCAD. Travis Mack MFP Design, LLC