Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HVCR fittings

Status
Not open for further replies.
metalonis

metalonis

Mechanical
Joined
Feb 28, 2002
Messages
183
Location
US
Can someone point me to a source for dimensions of HVCR fittings? Thanks in advance.
 
Sort by date Sort by votes
See SMACNA (Sheet Metal and Air Conditioning Contractors National Association) standards.
 
Upvote 0 Downvote
Thanks everyone. All good info. The references don't seem to give the actual dimensions of the connections, male & female, though. Are these the same as 37° flare, MS33649, J1926, MS16142, or J514?
 
Upvote 0 Downvote
metalonis
37* flare is used on steel tubing, whereas 45* flare is used on copper. Steel tubing is harder to flare thats why they use 37* flare.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AgsMyDude
  • Question Question
ASTM A403 Fittings - W vs. WX vs. WU
Replies
6
Views
2K
EdStainless
EdStainless
N
  • Question Question
ASME B16.9 fittings in EN-13480 design code
Replies
7
Views
1K
XL83NL
XL83NL
LeoSter
  • Locked
  • Question Question
Butt weld fittings
Replies
5
Views
2K
goutam_freelance
goutam_freelance
Y
  • Locked
  • Question Question
Use of Victaulic Fittings for Dust Collection
Replies
6
Views
1K
LittleInch
LittleInch
Xk333
  • Locked
  • Question Question
Socket welded fittings vs Butt welded fittings
2
Replies
34
Views
3K
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top