Dec 11, 2003 #1 metalonis Mechanical Feb 28, 2002 183 Can someone point me to a source for dimensions of HVCR fittings? Thanks in advance.
Dec 11, 2003 #2 1969grad Mechanical Apr 5, 2003 247 See SMACNA (Sheet Metal and Air Conditioning Contractors National Association) standards. Upvote 0 Downvote
Dec 11, 2003 #3 pennpoint Mechanical Feb 24, 2003 461 metalonis Check out http://www.muellerindustries.com You should find what your looking for pennpoint Upvote 0 Downvote
Dec 11, 2003 #4 imok2 Mechanical Oct 21, 2003 1,311 Another good site: http://grunerbrass.com/refriger.htm Upvote 0 Downvote
Dec 12, 2003 Thread starter #5 metalonis Mechanical Feb 28, 2002 183 Thanks everyone. All good info. The references don't seem to give the actual dimensions of the connections, male & female, though. Are these the same as 37° flare, MS33649, J1926, MS16142, or J514? Upvote 0 Downvote
Thanks everyone. All good info. The references don't seem to give the actual dimensions of the connections, male & female, though. Are these the same as 37° flare, MS33649, J1926, MS16142, or J514?
Dec 14, 2003 #6 imok2 Mechanical Oct 21, 2003 1,311 metalonis 37* flare is used on steel tubing, whereas 45* flare is used on copper. Steel tubing is harder to flare thats why they use 37* flare. Upvote 0 Downvote
metalonis 37* flare is used on steel tubing, whereas 45* flare is used on copper. Steel tubing is harder to flare thats why they use 37* flare.
