Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Human posture analysis, CatiaV5
- Thread starter LOFO
- Start date
Configurator
New member
Get your hands on the DSS Training Docs.
- Thread starter
- #4
Hello Azrael.
What I am trying to do is a static posture analysis of a simple dummy standing with wide stance (about 22 inches between feet). At first I do create a dummy and move the limbs in the desired position. Then I switch workbench to Human posture analysis. Normally, I should be able to run "postural score" but there are no values in the "postural score" window...
Is there a step by step procedure I could follow ?
Thanks
Louis
What I am trying to do is a static posture analysis of a simple dummy standing with wide stance (about 22 inches between feet). At first I do create a dummy and move the limbs in the desired position. Then I switch workbench to Human posture analysis. Normally, I should be able to run "postural score" but there are no values in the "postural score" window...
Is there a step by step procedure I could follow ?
Thanks
Louis
- Status