human file

[ajf342]

Idownloaded the 95th percentile male model from this site and I want to situate it so its sitting in a reclined position like on a recumbent bicycle. Any insight of how I would go about doing this would be great. Thanks in advance

 

[wali]

I have used the pinocchio look alike models quite a bit.
What I do is copy the assembly to another assembly - say "reclined".
I would then pick on a limb and redefine it's constraints. Using the joint as one constraint (insert), I then drag the limb around till it looks right, and leave it packaged.
You can get some interesting looking models as there are no other assembly constraints.
Wali