Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP Steam, Air and Psych Tables

Status
Not open for further replies.

deerpark

Mechanical
Nov 8, 2001
2
I will be taking the coveted PE exam this October and have two HP calculators. The 49G has the FE software loaded and I had some difficulties with the people that programmed the calc. My 48G, I would like to set up as my backup with the tables listed above. If there are formulas which I can program, please let me know where I can find them as I can program my calc myself. Thanks for any help.
 
Replies continue below

Recommended for you

I believe that the ASHRAE Fundamentals Handbook has these formulas.

A word of warning CHECK WITH YOUR LOCAL BOARD TO FIND OUT THERE CALCULATOR POLICY, SOME BOARDS WILL NOT LET YOU USED CANNED PROGRAMS that is all memory must be totally erased, a proctor may also witness or verify this.
 
Thanks, you are correct, I just checked my fundamentals. As for the calculator, I have checked and New Jersey does not have any restrictions. If you have heard otherwise, please let me know. Thanks again.
 
Try the following link:


There are typically not programs you can enter into your calculator by hand, but programs that you can use your connection cable to download into your calculator.

This site also gets you into a number of sites that are devoted to HP calculators.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor