HP 16500 Logic Analyzer

[vicw]

Hi,

Has anyone used this analyzer before? I'm trying to monitor the state of a processor. Any quick references or links to where I can learn how to use this?

Thanks,
Vic

 

[MMAshwin]

Hi,


Try these links, they are for a 16500C. If you have a B then change the name of the file eg the first link is
16500cug.pdf change it to 16500bug.pdf for the B version

Good luck :

http://ftp.agilent.com/pub/callpub/ddt/16500/docs/mframe/16500cug.pdf

The above link is the user guide

http://ftp.agilent.com/pub/callpub/ddt/16500/docs/mframe/16500cur.pdf

The above link is the user reference

http://ftp.agilent.com/pub/callpub/ddt/16500/docs/mframe/16500csg.pdf

The above link is the service guide

http://ftp.agilent.com/pub/callpub/ddt/16500/docs/mframe/16500cpr.pdf

The above link is the programmers guide

http://contact.tm.agilent.com/tmo/education/English/16500C_SG.html

The above link is 1 day course
Any help ?, yes no let me know.

Regards

 

[vicw]

Yes, helpful. Now that I know how to use it, how can I save the data on a floppy? I can save the data on the hard disk, but I am unalbe to save the data on a floppy. I read the user manual and reference and it doesn't help at all. I am using the HP 16505A prototype analyzer along with the HP 16500C Logic Analyzer. The 16505A is a unix based software, but I'm having problems saving configs and data onto a floppy disk. Any suggestions?

Vic

 

[melone]

If the 16500C is like the 16500B, then when you attempt to save, press the harddisk key and you should be able to select the floppy disk (flexible disk).

 

[vicw]

Yes, I did try that but when I first save onto the hard disk, the file size is 6MB. It doesn't fit onto a floppy. I want to save not only the config and data files. More importantly the data files, but I found out that inorder to view the data files the config has to be viewed as well. I did get the 16505a to save onto a floppy. I figured out a way to do so. Is there a way to save the files from the 16500 to a floppy. I read the manual and it did say there is a pack file function, but I am unable to find it.