Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to use different coordinate system

Status
Not open for further replies.
ghibt

ghibt

Mechanical
Joined
Nov 8, 2010
Messages
13
Location
DE
how to use different coordinate system in one simulation (BC)without have this error:"following attributes are applied to overlapping, intersecting, or adjoining regions in differing coordinate systems: BC-1(BC), BC-2(BC), BC-3(BC), BC-4(BC), BC-5(BC)
the input file was not generated"
thanks in advance
 
Status
Not open for further replies.

Similar threads

A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
S
  • Question Question
Define zaxis of coordinate system with python
Replies
2
Views
7K
solero5
S
Fblthp
  • Locked
  • Question Question
Abaqus How to show the coordinate system of beam elements in visualization window?
Replies
3
Views
2K
FEA way
FEA way
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
4K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top