Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to start Ansys LS-DYNA Drop Test Module(DTM)?

Status
Not open for further replies.
ashksingh

ashksingh

Mechanical
Joined
Nov 16, 2014
Messages
5
Location
US
Hi,

I am new to using ANSYS so forgive me for stupid questions.

I have to do a drop analysis of an Electronic packaging (remote) and was told by my Prof to use Ansys DTM. I installed ANSYS but can't seem to figure out how to start the DTM? Does it have to be installed separately or it is run from some other environment(like workbench) as an extension?

I have ANSYS 15.0 and have installed every product in the package.

Kindly help.
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
832
MihailW
M
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O

Part and Inventory Search

Sponsor

Back
Top