How to put tolerances and change arrows?

[szofer]

Hello!


I can't change this option in one computer. Field is unactive.


View attachment 3702


And another thing:


How to change style of arrows in dimension?

 

[ehorton]

You need to change your DTL File. Right click on open area of screen-->Properties--> then look for display_tols (I think) This should allow you to display tolerances. You can also look in there for arrow style or you can right click on dimension and change arrow style there. I'm not sure of this one either since I don't have pro-e open right now.

 

[omarhernandez]

szofer,


ehorton is right, but the option is called tol_display. What exactly do you want to change about the arrows.


omar

 

[skraba]

To change the arrow style in the drawing, click Format, then Arrow Style, pick the desired arrow style and then select all the arrows, you want to change. Confirm and you're done.

 

[harrisonking]

hi


if you want to change the arrows just move cursor to arrow than push RMB


regards


harrisonking

 

[karthikr]

Hello!


I can't change this option in one computer. Field is unactive.


View attachment 5668


And another thing:


How to change style of arrows in dimension?

1.right click_properties_drawing options.


2.set tol_dispaly to "no"& then


3.changedraw_arrow_style to either "closed,filled,open"View attachment 5669