Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to plot XY history output in a cylindrical CSYS (Abaqus) ?

Status
Not open for further replies.
P2150

P2150

Mechanical
Joined
Mar 17, 2017
Messages
1
Location
CA
Hi guys ! I'm looking for a way to plot XY history output results in a cylindrical CSYS (it's ok with field output but not for history..). I'm working on a pipe geometry where forces are applied radially in a cylindrical CSYS so it could be useful ... Thx 

 
Sort by date Sort by votes
Transform the field data (contour plot) into the cylindrical CSYS and use these field data as source for xy-data.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
ShiningEngineer
  • Locked
  • Question Question
How to plot the chosen element values permanent for plot export
Replies
2
Views
3K
ShiningEngineer
ShiningEngineer
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way
A
  • Question Question
Recreating Ansys Sim in Abaqus
Replies
0
Views
3K
Ariana_
A

Part and Inventory Search

Sponsor

Back
Top