Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HOW TO MODEL 3mm THK HANGER WIRE in STAAD Pro V8i

Status
Not open for further replies.
ARNAR

ARNAR

Structural
Joined
Sep 27, 2017
Messages
22
Location
AE
Hi guys, Please help me to find a solution.

I'm using Staad V8i for strcural design. I wants to model hanger wire 3mm( Dia)Thk in staad.
 
Sort by date Sort by votes
I'd put in hangers as loads. Something like that isn't worth modeling as it adds nothing to the structural integrity.

 
Upvote 0 Downvote
Go to general > property > define > you will see circular section . Enter 3 mm and material of the wire . And like war rose said , adding undesirable elements will add undesirable effects in the structure .
 
Upvote 0 Downvote
Has our level of confidence in structural analysis soared to the point of modelling wire that is less than 1/8" in diameter?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CDLD
  • Question Question
Floor load error in STAAD Pro Connect
Replies
6
Views
7K
CDLD
CDLD
Blackfairy
  • Question Question
Pile Post design and modeling - using STAAD Pro to Allpile
Replies
0
Views
346
Blackfairy
Blackfairy
XR250
  • Question Question
What Hanger to Use?
Replies
13
Views
4K
Greenalleycat
Greenalleycat
Althalus
  • Question Question
STAAD Feet vs Inches
Replies
4
Views
3K
dozer
dozer
Deker
  • Question Question
How To Handle Jobs In Progress When Closing Business
Replies
10
Views
13K
human909
human909

Part and Inventory Search

Sponsor

Back
Top