I read the help in ANSYS/LY-DYNA, and found that non-reflecting BC can only be applied to 3D Solid164 element. Does anyone konw how to define @D non-reflecting BC in LS-DYNA? I am modeling a elastic half space using axisymmetric element plane162. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to model 2D non-reflecting boundary condition in ANSYS/LS-DYNA?
- Thread starter gt4110a
- Start date
hello there!
The 2-D non-reflecting boundaries are not supported in the ansys/ls-dyna module, but only in the standalone lsdyna program. this means that you have to modify the input file (*.k) resulting from the ansys pre-processor. refer to the lsdyna manual for more details!
The 2-D non-reflecting boundaries are not supported in the ansys/ls-dyna module, but only in the standalone lsdyna program. this means that you have to modify the input file (*.k) resulting from the ansys pre-processor. refer to the lsdyna manual for more details!
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question