Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to make changes to Legend?
- Thread starter DeaB
- Start date
- Thread starter
- #2
Found my own answer on Microsoft site, so posting if helps anyone else who checks this thread.
go to the File (aka Backstage) menu. Look in Print, you will see Page Setup as a link at the complete end of the options. Rather small, but it's there.
To specify which bars you want to appear in the legend, edit the bar styles (Format > Bar styles > look for the dialog button at the bottom right of the section, it looks like a right angle and an arrow). By putting an asterisk (*) in front of a bar style name, you hide it in the legend.
I also found that you can add blank spaces before the titles of the legends. I did this to help with the spacing and make the legend less confusing. (drives me nuts how the titles for the symbols are closer to the OTHER symbol (to the left) that it DOESN"T represent.
go to the File (aka Backstage) menu. Look in Print, you will see Page Setup as a link at the complete end of the options. Rather small, but it's there.
To specify which bars you want to appear in the legend, edit the bar styles (Format > Bar styles > look for the dialog button at the bottom right of the section, it looks like a right angle and an arrow). By putting an asterisk (*) in front of a bar style name, you hide it in the legend.
I also found that you can add blank spaces before the titles of the legends. I did this to help with the spacing and make the legend less confusing. (drives me nuts how the titles for the symbols are closer to the OTHER symbol (to the left) that it DOESN"T represent.
- Status
Similar threads
- Locked
- Question
- Locked
- Question