Cansand
Structural
- Jan 14, 2007
- 102
I have three steps
In step 1 I have displacement field =[U1]resulted for the model
In Step 2 (Heat diffusion-Mechanical Analysis) I want to keep this displacement fixed =[U1] during this step
[U1] (make the model rigid)as I have steady state heat transfer
In Step 3 I want to eliminate this suppression on the [U1]
as transient response will start
-Please note that applying BC :{U}=0 in Step 2 and deactivating it in Step 3 doesn’t solve the issue as Step 3 will start in this case from {U}=0 and not from = [U1]
-It is impractical to use Restart Analysis because this simulating loop is repeated 4 times in the model
Thanks
In step 1 I have displacement field =[U1]resulted for the model
In Step 2 (Heat diffusion-Mechanical Analysis) I want to keep this displacement fixed =[U1] during this step
[U1] (make the model rigid)as I have steady state heat transfer
In Step 3 I want to eliminate this suppression on the [U1]
as transient response will start
-Please note that applying BC :{U}=0 in Step 2 and deactivating it in Step 3 doesn’t solve the issue as Step 3 will start in this case from {U}=0 and not from = [U1]
-It is impractical to use Restart Analysis because this simulating loop is repeated 4 times in the model
Thanks
