Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to interface Ansys and Matab for Data transfer

Status
Not open for further replies.
gansys

gansys

Mechanical
Joined
Apr 16, 2005
Messages
1
Location
US
I need to transfer Ansys results into matlab. For example, say, nodal stress values of selected nodes. is there any way to export data from Ansys to Matlab in such cases........do reply with suggestions
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
822
MihailW
M
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top