Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to implement a perfectly matched layer in Abaqus

Status
Not open for further replies.
lalarochester

lalarochester

Bioengineer
Joined
Nov 4, 2010
Messages
3
Location
US
Hi

I am trying to simulate wave propagation. How implement a perfectly matched layer?

I've seen such implementation in Comsol. Is it possible in Abaqus?

Thanks

Bo
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
How to Properly Implement Viscosity in SPH Using ABAQUS Explicit Analysis?
Replies
1
Views
2K
FEA way
FEA way
M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
A
  • Question Question
Recreating Ansys Sim in Abaqus
Replies
0
Views
3K
Ariana_
A

Part and Inventory Search

Sponsor

Back
Top