Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to extract the matrices from an ANSYS Workbench simulation for model order reduction?

Status
Not open for further replies.

JeSuisBourbaki

Student
Joined
Jan 26, 2023
Messages
2
Location
BR
Hello everybody,

I created an ANSYS (Workbench) model for a piezoeletric actuator. The actuator consist on a piezoelectric ceramic layer (orange) coupled to a internal turning tollholder (silver). I performed the simulation using the ACT extension Piezo&MEMS to assign the piezoeletric caracteristics to the layer geometry. I'd like to know how can I extract the matrices that relate the mechanical responses to the electrical responses of the entire system. Would anyone know how to do that?

My best regards to you all!

JeSuisPasBourbaki
 
 https://files.engineering.com/getfile.aspx?folder=ce6fa610-4b2c-4185-83ee-6370f27f8e98&file=Capture_d’écran_2023-01-26_173955.png
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top