Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to estimate the downstream flood level for residential stormwater design ?

Status
Not open for further replies.

tngv752

Structural
Joined
Sep 16, 2004
Messages
91
Location
AU
For OSD (Onsite stormwater detention) calculation, I am not sure how to estimate the downstream flood level for 1.5 year and 100 year flood level.

Thanks
 
You need to provide more information to get any useful responses. Is the OSD discharging to a stream, or are you trying to determine tailwater elevations downstream of your outlet? Also, are you trying to estimate or calculate?
 
The OSD will discharge water into the street gutter through a stormwater pit (stormwater pit with inlet pipe and orifice outlet). Downstream flood level will help me to obtain orifice and overflow weir level.
 
your TW would be determined by your downstream drainage facility at the rainfall frequency as dictated by your governing authority. In this case, IT SEEMS that it would be the WSE of your street gutter, but it is hard to tell with little information.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top