hi, could anyone suggest how to treat biocides ( 2-methyl-4-isothiazolin-3-one is of a particular interest) before they hit bioplant? expected influent concentration is 0.5-1 ppm. i heard something about sodium bisulfite but cannot understand the mechanism. i will appreciate very much any input.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to destroy biocide
- Thread starter lenavt
- Start date
2-methyl-4-isothiazolin-3-one is a non-persistent antimicrobial that is inherently biodegradable and degrades rapidly. You probably do not have anything to worry about if Iso enters your wastewater treatment plant.
Try to find the paper "THE ENVIRONMENTAL FATE OF ISOTHIAZOLONE BIOCIDES" by Rohm and Haas.
Try to find the paper "THE ENVIRONMENTAL FATE OF ISOTHIAZOLONE BIOCIDES" by Rohm and Haas.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question