Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to delete a perimeter dimension

Status
Not open for further replies.

ChrisDyson

Industrial
Joined
Aug 7, 2013
Messages
6
Location
GB
Hi Guys,

I've opened up a sketch with a perimeter dimension, but am unable to delete it.

I've tried Tools > expressions > then found the value in the list, highlighted it but the delete button (X) is shaded out.

Any ideas where I'm going wrong?

Thanks

Chris
 
Try and delete this perimeter dimension from the sketch environment.
[ul]
[li]Go in this sketch (edit with rollback or edit)[/li]
[li]Click on any dimension command, like Inferred Dimension[/li]
[li]Toolbar Dimensions will show up. It has tree icons[/li]
[li]Click on the firs icon, Sketch Dimensions Dialog[/li]
[li]In this dialogbox, from the list of sketch dimensions, select the Permiter dimension you want to delete[/li]
[li]Now, click the Delete in this dialogbox and Perimeter dimension will be deleted.[/li]
[/ul]
 
Thanks, thats worked. Brilliant.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top