Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to delete a jog of ordinate dimension in PorE 2001?

Status
Not open for further replies.

gzhong

Mechanical
Joined
Sep 13, 2001
Messages
3
Location
US
Does anyone know how to delete a jog in ordinate dimension?
 
Go to the top menu INSERT then select JOG. Pick the dimension text of the dimension that you want to jog then select on the leader line and move it to where you want. If you wnat to move the jog after the command just double click on one of the jog points and move it to where you want.
 
Natester, thanks for your respones. For Ordinating dimension, the difficulty is not to create a jog but to delete a jog you have already created. For regular dimension, you can use default witness line to get rid of a jog, but for ordinating dimension, the "default witness line" option is not available. I don't know this is a bug or just a configuration problem.
 
Hi,
Try this;
Move the dim leader (with jog) back into the horizontal or vertical position using the center "grip" - it should snap into place.
Now, when you re-highlight that dimension for modification, it should not show any jog points.

Hope this helps,

JW
 
Thanks, JW, that works.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top