Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to define the consstraints for bolted flanges by Ceaser II?

Status
Not open for further replies.
mechengineer

mechengineer

Mechanical
Joined
Apr 19, 2001
Messages
268
Location
SG
Hi

May any one advise how to define the consstraints for bolted flanges by Ceaser II at points B1 & B2? How big is the difference in the constraint forces/moments between points A1/A2 and B1/B2? I think the constraint forces/moments at points B1/B2 shall be less than the forces/moments at A1/A2. Thanks.
UG-44_jkpgn9.jpg
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
"error, the job file is write protected" warning in Caesar ii
Replies
0
Views
200
rafaresma
R
nhorizon
  • Locked
  • Question Question
Caesar-II Soil modeler for submerged SOIL
Replies
0
Views
2K
nhorizon
nhorizon
madl_07
  • Locked
  • Question Question
ASME B31.1 Weld Joint Efficiency, why is Caesar II dividing the weld eff to stress allowable?
Replies
0
Views
978
madl_07
madl_07
M
  • Locked
  • Question Question
Caesar II - Duvidas sobre Harmonic.
Replies
1
Views
2K
johnengkol
johnengkol
pylandj1
  • Locked
  • Question Question
CAESAR II Hoop Stress
Replies
1
Views
2K
johnengkol
johnengkol

Part and Inventory Search

Sponsor

Back
Top