Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to cycle through a assembly and activate each part as the work!

Status
Not open for further replies.
mnash60

mnash60

Materials
Joined
Feb 21, 2012
Messages
29
Location
US
What I'm to accomplish is I want to have my assembly open and one by one select the 1st part and make it the work part.then run piece of my journal and save. Then select the next part and do the same and etc.
 
Sort by date Sort by votes
There is an article here that shows how to step through all the parts in an assembly. You can record a journal while making a component the work part to see what code is necessary to set the work part. Incorporate the recorded code into the code from the article to get what you want.

www.nxjournaling.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
A
  • Locked
  • Question Question
Has anyone attempted to use Animation Designer and Part Families on the same file?
Replies
1
Views
3K
Kenja824
Kenja824
Forzindi
  • Locked
  • Question Question
Can we attach a solid body through journal in NX part ?
Replies
1
Views
3K
Bleaker
Bleaker

Part and Inventory Search

Sponsor

Back
Top