Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to cure E-stops

Status
Not open for further replies.

cform

Industrial
Joined
Aug 16, 2006
Messages
2
Location
PL
thread223-129866

Hello I have an used RX60, can anybody help me with RX60 safety card, to bypass the E-stop. An electric schema or manual.

Regards,
Martin
 
I think we can help. We went through this last year. We now have 5 RX-60s. You will need to tell me what the specific problem is.

doug
 
I assume you have a CS7M controller.
On J11 at the back of the controller, you need to jumper 43 to 44 (or, more properly, put an e-stop circuit between them).
J12 is used for a remote front panel. If you are using a front panel right on the controller, I think you need to jumper some things there. I can get you details for that if you want.
 
Hi

Ok we managed to get hold of the manuals for the safety card, everything works perfekt now.

Martin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top