Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to create an inner section to plot results

Status
Not open for further replies.
lopessilva

lopessilva

Mechanical
Joined
Nov 26, 2011
Messages
49
Location
PT
Hello,

I´m performing a stress analysis on ANSYS, and I want to create an inner section on the midplane , so I can plot stress results on the midplane to see stress distribution on the inner side.

I´m using ANSYS mechanical 13.

Regards,
Hugo
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
850
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
Sparky4598
  • Locked
  • Question Question
Static structural structural error plot
Replies
0
Views
2K
Sparky4598
Sparky4598
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top