vijay sawade
Mechanical
I want check in NX part in Teamcenter .i have created part number in teamcenter
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to Check in &Check out NX part in Teamcenter
- Thread starter vijay sawade
- Start date
- Status
You have two options.
In NX right click on the item in assembly navigator and select Check-out or check-in
In Teamcenter find your item, rightclick the NX Dataset (UGmaster or UGpart) and select Check-out/-in...
Couldn't be much simpeler...
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
In NX right click on the item in assembly navigator and select Check-out or check-in
In Teamcenter find your item, rightclick the NX Dataset (UGmaster or UGpart) and select Check-out/-in...
Couldn't be much simpeler...
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
There is actually a third option as well and that is to tell NX in the Customer Defaults to do the Check-out check-in procedure automatically...
This is however not (for concurrent engineering) the most prefered option.
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
This is however not (for concurrent engineering) the most prefered option.
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
- Thread starter
- #4
vijay sawade
Mechanical
Thank you, Sir
How to integrate (connect) NX part with Teamcenter,
By using nomenclature i have created a part number...
How to integrate (connect) NX part with Teamcenter,
By using nomenclature i have created a part number...
If you have NX integrated (NXManager) with Teamcenter then there is no need to first create and item in Teamcenter...
You can just Start NX from Teamcenter and with file new (in Nx) create a new NXpart which will create an item in Teamcenter for you...
I suggest you get some books or documentation on how to work with NX and Teamcenter...would make it much easier for you
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
You can just Start NX from Teamcenter and with file new (in Nx) create a new NXpart which will create an item in Teamcenter for you...
I suggest you get some books or documentation on how to work with NX and Teamcenter...would make it much easier for you
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5
- Status
