Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to change the moment factor in SAFE

Status
Not open for further replies.
donnabean

donnabean

Structural
Joined
Dec 12, 2013
Messages
20
Location
CA
I am using SPslab to design a flat slab and use SAFE to redesign. In Spslab. i can change column stiffeness percentage and moment factor such as 0.65,0.35 to manipulate the moment distribution, but in SAFE, can i achive pin connection between slab and column strip, and how to change the moment factors?
thanks.
 
Status
Not open for further replies.

Similar threads

EngDM
  • Locked
  • Question Question
Slab on Grade in Safe
Replies
0
Views
1K
EngDM
EngDM
GJoeRMK
  • Question Question
Sap API question, Are the parameter dimensions in SapModel.File.NewSolidBlock (3,3,1) capped at inches?
Replies
2
Views
2K
GJoeRMK
GJoeRMK
moyseh
  • Locked
  • Question Question
SAFE 21 Issues
Replies
0
Views
1K
moyseh
moyseh
Ali Shariff
  • Locked
  • Question Question
Urgent !!!!!! Safe Analysis show Large Enormous displacement values in Ux and Uy direction
Replies
2
Views
1K
Celt83
Celt83
Luceid
  • Locked
  • Question Question
SAFE slow analysis
Replies
1
Views
1K
Luceid
Luceid

Part and Inventory Search

Sponsor

Back
Top