Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to carry out nalysis in Abaqus after importing a Hypermesh file in
- Thread starter newFriend
- Start date
I have never used Hypermesh before, but does the mesh behave in the same manner as if you created it in Abaqus, if so then you can refer to the Abaqus manual for help on progressing your model. I recommend Getting started with Abaqus Interactive Edition 6.x Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE if you have never used Abaqus before. Hope this helps you.
- Status
Similar threads
- Locked
- Question
