Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to calculate the flow and pressure When cut a 1" hole on the baffle gussets?

Status
Not open for further replies.
richmantx

richmantx

Mechanical
Joined
Jan 13, 2019
Messages
1
Location
US
Tank baffles are prone to cullet buildup, typically on the underside of the gussets. Cut a 1" hole on the baffle gussets will reduce cullet buildup by altering flow and pressure.
I try to use orifice plate model to calculate the flow and pressure now. But it may be not rigt? Do anyone has some idea for that.
 
Status
Not open for further replies.

Similar threads

UJJ
  • Question Question
The way to get old version API 650 (7th or 8th)??
Replies
9
Views
3K
fel3
fel3
Andrew63411
  • Locked
  • Question Question
Why does API 653 prohibit lap patches on shells >1/2" thickness.
Replies
1
Views
885
IFRs
IFRs
shvet
  • Locked
  • Question Question
API 620 term "design external pressure"
Replies
6
Views
631
HTURKAK
HTURKAK
tmgczb
  • Locked
  • Question Question
How is pressure under tank bottom plate distributed？
Replies
11
Views
3K
IFRs
IFRs
GOSP75
  • Question Question
Regarding shell to curb angle welding category and NDT requirement
Replies
8
Views
12K
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top