Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to calculate ho?

Status
Not open for further replies.
jdonville

jdonville

Geotechnical
Joined
Sep 29, 2003
Messages
985
Location
US
In the 2005 spec, is ho (Sections E, F) taken about the major or minor axis? It's not very clearly defined, as far as I can tell.

Jeff
 
Sort by date Sort by votes
All,

Never mind - I found it in the Commentary.

Thanks,

Jeff
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ELSARWAN
  • Locked
  • Question Question
how can i calculate the required torque for the pre-tension joints
Replies
3
Views
1K
dik
dik
JanLCA
AISC's Short Span Bridges Manual similar to PCI's Short Span Bridges Spans to 100 feet
Replies
1
Views
8K
IRstuff
IRstuff
arash68
  • Locked
  • Poll Poll
Lateral torsional buckling effective length?
Replies
1
Views
3K
JoshPlumSE
JoshPlumSE
tmschrader
  • Locked
  • Question Question
ASD to LRFD and Ultra high strength steels
Replies
12
Views
2K
JoshPlumSE
JoshPlumSE
CalebA
  • Locked
  • Question Question
Prying Action - Floorbeam to Girder Double Angle Connection
Replies
4
Views
1K
ProgrammingPE
ProgrammingPE

Part and Inventory Search

Sponsor

Back
Top