Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to average plastic strain of a specific region

Status
Not open for further replies.
alireza2013

alireza2013

Mechanical
Joined
Aug 1, 2013
Messages
2
Location
IR
Hi
I want to average plastic strain in the outer surface of my model for elements which have plastic strain between 0.3 and 1. Is there any way to do this. I'd be grateful if anyone could help me with. Thanks, Ali
 
Status
Not open for further replies.

Similar threads

K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
M
  • Locked
  • Question Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
SKSA
  • Locked
  • Question Question
Angle of Internal Friction with Plastic Strain
Replies
1
Views
365
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top