Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to apply the Platform and Pipe weight

Status
Not open for further replies.
vinothhsvk

vinothhsvk

Mechanical
Joined
May 16, 2018
Messages
14
Location
IN
Hi All,

I am beginner for vessel design. Now i am doing one horizontal vessel design. The vessel have access platform and some pipe lines are routed on platform. I want to know how to apply the platform and pipe weight in PV-Elite software.
 
Status
Not open for further replies.

Similar threads

HungM
  • Locked
  • Question Question
Does UCL apply to cladding on tubesheet?
Replies
1
Views
3K
GD2
GD2
J
  • Locked
  • Question Question
Flange ID to Pipe OD Allowable Mismatch
Replies
1
Views
1K
Cobra17
Cobra17
B
  • Locked
  • Question Question
ASME VIII-2 5.5.3: Which Yield and Tensile Strength Values Apply for Sps Calculations?
Replies
5
Views
2K
Barus
B
S
  • Locked
Biostat B (Sartorius) - How to decontaminate the inner cooling system for repair, if the pumps are broken?
Replies
1
Views
1K
hacksaw
hacksaw
pvros
  • Locked
  • Question Question
ASME VIII Div.2 - Part 5 - table 5.3 - how to treat temperature and thermal laod
Replies
2
Views
871
pvros
pvros

Part and Inventory Search

Sponsor

Back
Top