Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to apply frequency dependent shear modulus in NX Nastran

Status
Not open for further replies.
modeldamper

modeldamper

Mechanical
Jan 21, 2014
26
Dear forum members

Can someone explain how to write a frequency dependent shear modulus and the corresponding TABLED1 entries?

Thanks
 
Status
Not open for further replies.

Similar threads

test123123
  • Question
Transient Heat Transfer with 100 Time-Dependent Data Surfaces in FEMAP
Replies
1
Views
1K
karachun
karachun
Xprivate
  • Locked
  • Question
RBE dependent independent DOF CSYS
Replies
5
Views
1K
rb1957
rb1957
IcarusAero223
  • Question
Unable to mesh layer by layer in surface geometry 1
Replies
4
Views
3K
BlasMolero
BlasMolero
manees90
  • Locked
  • Question
How to Mesh Surfaces with 90-Degree Bends Using Shell Elements to Minimize Artificial Stresses
Replies
1
Views
1K
SWComposites
SWComposites
Xprivate
  • Locked
  • Question
Point Move to Error 1
Replies
2
Views
2K
Xprivate
Xprivate

Part and Inventory Search

Sponsor

Back
Top Bottom