Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to apply frequency dependent shear modulus in NX Nastran

Status
Not open for further replies.
modeldamper

modeldamper

Mechanical
Joined
Jan 21, 2014
Messages
26
Location
US
Dear forum members

Can someone explain how to write a frequency dependent shear modulus and the corresponding TABLED1 entries?

Thanks
 
Status
Not open for further replies.

Similar threads

test123123
  • Locked
  • Question Question
Transient Heat Transfer with 100 Time-Dependent Data Surfaces in FEMAP
Replies
1
Views
2K
karachun
karachun
Xprivate
  • Locked
  • Question Question
RBE dependent independent DOF CSYS
Replies
5
Views
1K
rb1957
rb1957
ITsSB
  • Question Question
How can I get rid of free edges
Replies
4
Views
9K
BlasMolero
BlasMolero
IcarusAero223
  • Locked
  • Question Question
Unable to mesh layer by layer in surface geometry
Replies
4
Views
3K
BlasMolero
BlasMolero
manees90
  • Locked
  • Question Question
How to Mesh Surfaces with 90-Degree Bends Using Shell Elements to Minimize Artificial Stresses
Replies
1
Views
2K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top