Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to achieve 6000 psi for paving b

Status
Not open for further replies.
FLEXES

FLEXES

Mechanical
Joined
Nov 16, 2016
Messages
1
Location
PH
how to achieve 6000 psi for paving blocks in just 14 days
 
Sort by date Sort by votes
A proper mix design and steam curing.
 
Upvote 0 Downvote
Steam curing is nice, but I know of some concrete mixes they use for roadworks around here that will get you that strength in 24 hours.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX?
Replies
0
Views
7K
abrarnth
A
JamieHir
  • Locked
  • Question Question
Question about Paving Roads with a dip and tying in?
Replies
1
Views
2K
swazimatt
swazimatt
tmgczb
  • Locked
  • Question Question
How to understand Cone-Up bottom in PIP 03020?
Replies
1
Views
1K
HTURKAK
HTURKAK
SandyBill
  • Locked
  • Question Question
Looking for threads relating to best practice/calcs for building temporary supports for mobile struc
Replies
6
Views
1K
bimr
bimr
Sudipto Ray
  • Locked
  • Question Question
how to create column section surrounding by steel plate in abaqus?
Replies
0
Views
363
Sudipto Ray
Sudipto Ray

Part and Inventory Search

Sponsor

Back
Top