Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How simulate in design simulation in nx 9

Status
Not open for further replies.
suyog21

suyog21

Automotive
Feb 23, 2011
50
12_ipnt5n.jpg


How simulate in design simulation in nx9


if pressure 20bar and vane is rotating and sliding assuming material steel.

I tried but not able to fix the vane in slot portion in simulation.

Suyog Patil
CAD Engineer
NX 7.5. 8, 8.5 9, 10 TC-9
 
Status
Not open for further replies.

Similar threads

Jashe
  • Question
Sketch Failure Message in NX 1
Replies
3
Views
1K
Jashe
Jashe
CAD2015
  • Question
NX 2212 - How to hide centerlines in 2D views..... 1
Replies
2
Views
1K
CAD2015
CAD2015
hnam2003
  • Locked
  • Question
How to patch detail prints in NX 10
Replies
5
Views
488
Toost
Toost
shightower
  • Question
Countersink on both sides of hole in NX?
Replies
3
Views
2K
Bleaker
Bleaker
CAD2015
  • Question
Converting a PDF document to CGM file in NX....................... 1
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top Bottom