Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how is half-shear correctly drawn on blueprint?

Status
Not open for further replies.
rubepierre

rubepierre

Industrial
Joined
Dec 15, 2001
Messages
30
Location
US
confused at this site
terms "dimple" and "pimple" also used
written as one thing and drawn as another..
looking at part the half shear material (pimple) is facing
me but drawn showing it on the other side..confused..
thank you...
 
Status
Not open for further replies.

Similar threads

see_gen_notes
  • Locked
  • Question Question
Does a leger angle anchor produce tension AND shear or it tension OR shear?
Replies
11
Views
5K
kingnero
kingnero
Structural engineering EIT
  • Locked
  • Question Question
RISA connection Bolt Shear Strength
Replies
1
Views
1K
DrZoidberWoop
DrZoidberWoop
XL83NL
  • Locked
  • Question Question
Marangoni effect issues on orbital welding
Replies
8
Views
5K
XL83NL
XL83NL
mte12
  • Locked
  • Solved
What type of weld is this
Replies
14
Views
5K
kingnero
kingnero
GOSP75
  • Locked
NDT req for butt weld bottom plates where no annular plates small diameter API 650 tank .RT is required or Vacuum box testing is enough.
Replies
5
Views
5K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top