Jul 21, 2014 #1 suyog21 Automotive Joined Feb 23, 2011 Messages 50 Location IN this nx6 file. i want to fit the two section profile along the surface. how to do it. http://files.engineering.com/getfile.aspx?folder=cf3b11db-4438-40f1-a3be-052e70712072&file=sweep_variable_section.prt
Jul 21, 2014 #2 Arkance/PhoeNX Mechanical Joined Mar 2, 2010 Messages 870 Location AU have a look at the attached video Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.2, NX10 Beta Upvote 0 Downvote
have a look at the attached video Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.2, NX10 Beta
Jul 22, 2014 Thread starter #3 suyog21 Automotive Joined Feb 23, 2011 Messages 50 Location IN Thanks.. yes got it. Upvote 0 Downvote