How Femap works with other solvers (Ansys, Abaqus etc)?

[jacksonfem]

How I can run an analysis with Femap, using other solver than NxNastran?. For example with Ansys solver...

 

[ThomasH]

Select a different solver when you create the analysis set an go from there. I haven't tried Ansys specifically but I can't see any reason why i shouldn't work

Good Luck

Thomas

 

[jacksonfem]

It appears a message like "Enviroment variable ANSYS_EXE haw not been defined for solver". I attached an image below.....

 

[namklof]

See section 8.3.3 in the help manual.

 

[jacksonfem]

Thanks!

I read that....so I suggest I must install Ansys software to run it.