Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How does one interpret CGR ration.

Status
Not open for further replies.
zamakaze

zamakaze

Chemical
Joined
Sep 3, 2020
Messages
48
Location
CA
How does one interpret CGR ration. If there is a reservoir fluid composition and a flash CGR ratio of 165 STB/MMSCF...does that mean if gas flow is 200 MMSCFD then condensate will be 200*165 = 33000 bpd??
 
Status
Not open for further replies.

Similar threads

adrich91
  • Locked
  • Question Question
How to interpret "pressure" in incompressible fluids pipes
Replies
6
Views
2K
adrich91
adrich91
Peter_Kim_niceman
  • Locked
  • Question Question
How to cool down liquid CO2 Tank
Replies
9
Views
1K
Peter_Kim_niceman
Peter_Kim_niceman
rika kose
  • Locked
  • Question Question
How to determine the max/min allowable working pressure
Replies
9
Views
925
rika kose
rika kose
aegis4048
  • Locked
  • Question Question
How to implement P&ID for liquid level control?
Replies
16
Views
3K
LittleInch
LittleInch
Sammule
  • Locked
  • Question Question
How to set a diaphragmvalve and a blanked-off junction in PIPENET?
Replies
0
Views
186
Sammule
Sammule

Part and Inventory Search

Sponsor

Back
Top