Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do you choose the X axis in ABAQUS CAE?

Status
Not open for further replies.
rm447

rm447

Bioengineer
Joined
Sep 19, 2007
Messages
21
Location
US
Hi, I am trying to plot stress vs. strain values in ABAQUS CAE but ABAQUS keeps plotting them versus "time". How can I choose my own X axis? I don't seem to be able to figure this out even though it must be very trivial!! I will appreciate your help!!
Thanks :)
 
Sort by date Sort by votes
You plot each of them vs. time and then you create a 3rd XYData using operate on XYData, combine (). This will give you stress vs strain.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
408
mj345
mj345
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
Shahrukh_Islam
  • Question Question
What does Convergence Tolerances mean in Abaqus?
Replies
1
Views
9K
FEA way
FEA way
A
  • Locked
  • Question Question
ABAQUS: Does abaqus transform density in body force?
Replies
2
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top